Micro Fuel-cell Cars
Micro Fuel-cell Cars
Cars, micro fuel-stations, solar arrays, accessories, cables..
2081 HyRunner GT
Specifications
Electrolyser mode: 2W
Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
H x W x D: 82x112x212mm
Weight: 340g
A powerful model fuel-cell car with an innovative design. It has a reversible FC stack, so it produces its own hydrogen when an external voltage is applied. Textbook included.
Specifications
Electrolyser mode: 2W
Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
H x W x D: 82x112x212mm
Weight: 340g
A powerful model fuel-cell car with an innovative design. It has a reversible FC stack, so it produces its own hydrogen when an external voltage is applied. Textbook included.
2053 Fuel-cell Concept Car
Specifications
Power: 300mW
H x W x D: 45x240x100mm
Weight: 260g
This, our most realistic model of a hydrogen fuel-cell vehicle, has a two-cell stack that uses hydrogen and air. Charging time is about 30 seconds; running time about 7 minutes. Textbook included.
Specifications
Power: 300mW
H x W x D: 45x240x100mm
Weight: 260g
This, our most realistic model of a hydrogen fuel-cell vehicle, has a two-cell stack that uses hydrogen and air. Charging time is about 30 seconds; running time about 7 minutes. Textbook included.
2050-4 HyRunner ePack
Specifications
Electrolyser mode: 1W
Fuel-cell mode: 500mW
Gas storage: 15cm³ H2; 15cm³ O2
Solar Module: 2.0V 260mA
Power Supply: 1.2A
H x W x D: 75x90x200mm
Weight: 375g
This model fuel-cell vehicle has a reversible fuel-cell, so it can produce its own hydrogen when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-cell to power the car's electric motor. Charging time: about 2 minutes with PowerSupply Junior, or 9 minutes with the Solar Module Basic in sunlight. Running time: about 8 minutes. PowerSupply Junior, Solar Module Basic and textbook included.
Specifications
Electrolyser mode: 1W
Fuel-cell mode: 500mW
Gas storage: 15cm³ H2; 15cm³ O2
Solar Module: 2.0V 260mA
Power Supply: 1.2A
H x W x D: 75x90x200mm
Weight: 375g
This model fuel-cell vehicle has a reversible fuel-cell, so it can produce its own hydrogen when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-cell to power the car's electric motor. Charging time: about 2 minutes with PowerSupply Junior, or 9 minutes with the Solar Module Basic in sunlight. Running time: about 8 minutes. PowerSupply Junior, Solar Module Basic and textbook included.
2081-4 HyRunner GT ePack
Specifications
Electrolyser mode: 2W Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
Power Supply: 1.2A
Solar Module: 4.0V 350mA
H x W x D: 82x112x212mm
Weight: 572g
A powerful model fuel-cell car with an innovative design. It has a reversible fuel-cell stack, so it can produce its own hydrogen when an external voltage is applied. Charging time is about 1 minute with the PowerSupply Junior and 3 minutes with the Solar Module HyRunner GT solar cells under sunlight. Running time is about 4 minutes. The PowerSupply Junior, Solar Module HyRunner GT and textbook are included.
Specifications
Electrolyser mode: 2W Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
Power Supply: 1.2A
Solar Module: 4.0V 350mA
H x W x D: 82x112x212mm
Weight: 572g
A powerful model fuel-cell car with an innovative design. It has a reversible fuel-cell stack, so it can produce its own hydrogen when an external voltage is applied. Charging time is about 1 minute with the PowerSupply Junior and 3 minutes with the Solar Module HyRunner GT solar cells under sunlight. Running time is about 4 minutes. The PowerSupply Junior, Solar Module HyRunner GT and textbook are included.
2050 HyRunner
Specifications
Electrolyser mode: 1W
Fuel-cell mode: 500mW
Gas storage: 15cm³ H2; 15cm³ O2
H x W x D: 75x90x200mm Weight: 260g
This model fuel-cell vehicle has a reversible fuel-cell, so it can produce its own hydrogen when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-cell to power the electric motor in the car. Textbook included.
Specifications
Electrolyser mode: 1W
Fuel-cell mode: 500mW
Gas storage: 15cm³ H2; 15cm³ O2
H x W x D: 75x90x200mm Weight: 260g
This model fuel-cell vehicle has a reversible fuel-cell, so it can produce its own hydrogen when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-cell to power the electric motor in the car. Textbook included.
2081-5 HyRunner GT/RC
Specifications
Electrolyser mode: 2W Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
Power Supply: 1.2A Solar Module: 4.0V 350mA
Remote Control: Digital proportional FM system
H x W x D: 82x112x212mm Weight: 1.2kg
A powerful, remote-controlled model fuel-cell car with an innovative design. It has a reversible fuel-cell stack, so it can produce its own hydrogen when an external voltage is applied. Charging time: about 1 minute with the PowerSupply Junior; 3 minutes with the Solar Module HyRunner GT's solar cells in sunlight. Running time about 4 minutes. PowerSupply Junior, Solar Module HyRunner GT, remote control, textbook included.
Specifications
Electrolyser mode: 2W Fuel-cell mode: 1W
Gas storage: 16cm³ H2; 8cm³ O2
Power Supply: 1.2A Solar Module: 4.0V 350mA
Remote Control: Digital proportional FM system
H x W x D: 82x112x212mm Weight: 1.2kg
A powerful, remote-controlled model fuel-cell car with an innovative design. It has a reversible fuel-cell stack, so it can produce its own hydrogen when an external voltage is applied. Charging time: about 1 minute with the PowerSupply Junior; 3 minutes with the Solar Module HyRunner GT's solar cells in sunlight. Running time about 4 minutes. PowerSupply Junior, Solar Module HyRunner GT, remote control, textbook included.
2057 Hydrogen Gas Station 2
Specifications
Electrolyser: 1 W
Gas storage: 20cm³ H2
Hydrogen production: 4.3cm³/minute
Solar Module: 2.0V 1.0A
H x W x D: 230x360x150mm
Weight: 1.2kg
A hydrogen gas station designed for use with the Fuel-cell Concept Car. It consists of an electrolyser, a hydrogen-storage tank and a three-panel solar module.
Specifications
Electrolyser: 1 W
Gas storage: 20cm³ H2
Hydrogen production: 4.3cm³/minute
Solar Module: 2.0V 1.0A
H x W x D: 230x360x150mm
Weight: 1.2kg
A hydrogen gas station designed for use with the Fuel-cell Concept Car. It consists of an electrolyser, a hydrogen-storage tank and a three-panel solar module.
2086 Solar Module Basic
Specifications
Power: 2.0V 260mA
H x W x D: 63x83x3mm
Weight: 25g
A solar module for the HyRunner and the Junior electrolyser.
Specifications
Power: 2.0V 260mA
H x W x D: 63x83x3mm
Weight: 25g
A solar module for the HyRunner and the Junior electrolyser.
2021 Solar Module Junior
Specifications
Power: 2.0V 350mA
H x W x D: 65 x 150 x 60 mm
Weight: 125g
A single solar module on a base plate, to be used as an electrical supply for the HyRunner and the Junior electrolysers.
Specifications
Power: 2.0V 350mA
H x W x D: 65 x 150 x 60 mm
Weight: 125g
A single solar module on a base plate, to be used as an electrical supply for the HyRunner and the Junior electrolysers.
2087 Solar Module HyRunner GT
Specifications
Power: 4.0V 350mA
H x W x D: 30x112x290mm
Weight: 142g
A solar module for the HyRunner GT.
Specifications
Power: 4.0V 350mA
H x W x D: 30x112x290mm
Weight: 142g
A solar module for the HyRunner GT.
1931 Videolight
Specifications
Power: 300W
H x W x D: 380x260x260mm
Weight: 1 kg
A quartz-halogen lamp on a tripod to use instead of the sun to operate the Solar Module of the HyRunner GT, the Hydrogen Gas Station 2 and the Solar Module Premium.
2030 Spotlight
Specifications
Power: 75W
H x W x D: 490x260x260mm
Weight: 3.4kg
A quartz-halogen lamp to use instead of the sun to operate the Solar Module Basic, the Solar Module Junior, the Solar Module Eco, the Junior Basic, the Eco H2/Air and the Eco H2/O2.
Specifications
Power: 300W
H x W x D: 380x260x260mm
Weight: 1 kg
A quartz-halogen lamp on a tripod to use instead of the sun to operate the Solar Module of the HyRunner GT, the Hydrogen Gas Station 2 and the Solar Module Premium.
2030 Spotlight
Specifications
Power: 75W
H x W x D: 490x260x260mm
Weight: 3.4kg
A quartz-halogen lamp to use instead of the sun to operate the Solar Module Basic, the Solar Module Junior, the Solar Module Eco, the Junior Basic, the Eco H2/Air and the Eco H2/O2.
2033 PowerSupply Junior
Specifications
Input: 100-240V, 50-60Hz
Output: 5.0VDC 1.2A
Weight: 90g
A power-supply for the HyRunner, HyRunner GT and Junior electrolysers.
Specifications
Input: 100-240V, 50-60Hz
Output: 5.0VDC 1.2A
Weight: 90g
A power-supply for the HyRunner, HyRunner GT and Junior electrolysers.
2024 Cable Red, Junior
2025 Cable Black, Junior
Specifications
Plug: 2mm
Length: 50cm
Red and black connector-cables for the HyRunner, HyRunner GT and Junior products.
2025 Cable Black, Junior
Specifications
Plug: 2mm
Length: 50cm
Red and black connector-cables for the HyRunner, HyRunner GT and Junior products.
2023 Decade Resistor, Junior
Specifications
Maximum capacity: 1W
Ports: 2mm
H x W x D: 40x160x130mm
Weight: 190g
A decade resistor for the HyRunner, HyRunner GT and Junior products.
Specifications
Maximum capacity: 1W
Ports: 2mm
H x W x D: 40x160x130mm
Weight: 190g
A decade resistor for the HyRunner, HyRunner GT and Junior products.
2027 Multimeter Junior
Specifications
Ports: 2 mm
H x W x D: 125x70x30mm
Weight: 140g
A digital multimeter for the HyRunner, HyRunner GT and Junior products.
Specifications
Ports: 2 mm
H x W x D: 125x70x30mm
Weight: 140g
A digital multimeter for the HyRunner, HyRunner GT and Junior products.
2085 Experimentation Kit Junior
Specifications
Decade Resistor:
Maximum capacity: 1W
Ports: 2mm
H x W x D: 40x160x130mm
Weight: 190g
Multimeter Junior:
Ports: 2mm
H x W x D: 125x70x30mm
Weight: 140g
An experimentation kit consisting of a Decade Resistor Junior, two Multimeters Junior, a stopwatch, and cables. Suitable for the HyRunner and HyRunner GT fuel-cell cars, as well as the Junior products.
Specifications
Decade Resistor:
Maximum capacity: 1W
Ports: 2mm
H x W x D: 40x160x130mm
Weight: 190g
Multimeter Junior:
Ports: 2mm
H x W x D: 125x70x30mm
Weight: 140g
An experimentation kit consisting of a Decade Resistor Junior, two Multimeters Junior, a stopwatch, and cables. Suitable for the HyRunner and HyRunner GT fuel-cell cars, as well as the Junior products.
1950 Fuel-cell Monitor
Specifications
Power: 0-10VDC 0-5A Pmax = 5W
Ports: 2 and 4 mm USB Cable: 180 cm A/B
H x W x D: 40x160x100mm Weight: 235g
An external transformer-card for measuring and recording the characteristics of h-tec's fuel-cells. Connected to a PC via a USB cable. The software allows you to plot voltage-current, power-
voltage, power-current & power-time characteristics. Recording can be done manually, automatically, at certain voltage or current points, or at MPP. Data can be recorded as an Excel file. Minimum system: a PC with Windows operating system Win98, ME, 2000, NT or XP, 100MB disk-space, Pentium 1, 100MHz+, USB port. Recommended: MS Excel (for individualised data-
plotting). Package includes card, USB cable, software, cables.
Specifications
Power: 0-10VDC 0-5A Pmax = 5W
Ports: 2 and 4 mm USB Cable: 180 cm A/B
H x W x D: 40x160x100mm Weight: 235g
An external transformer-card for measuring and recording the characteristics of h-tec's fuel-cells. Connected to a PC via a USB cable. The software allows you to plot voltage-current, power-
voltage, power-current & power-time characteristics. Recording can be done manually, automatically, at certain voltage or current points, or at MPP. Data can be recorded as an Excel file. Minimum system: a PC with Windows operating system Win98, ME, 2000, NT or XP, 100MB disk-space, Pentium 1, 100MHz+, USB port. Recommended: MS Excel (for individualised data-
plotting). Package includes card, USB cable, software, cables.
$300
Prices exclude GST, freight & packaging.
$385
$400
$535
Price on
application:
please email us
application:
please email us
$700
$530
$28
$60
$80
$455
$120
$58
$5.50ea
$135
$24
$225
$995
$400
2051 HySpeedster
Specifications
Electrolyser mode: 2W (maximum 4V and 500mA)
Fuel-cell mode: 1W
Gas storage: 15cm³ H2; 15cm³ O2
H x W x D: 75x90x200mm Weight: 300g
This model fuel-cell vehicle has a two-cell reversible fuel-cell stack, twice the size of the fuel-cell in the HyRunner, so it can produce its own hydrogen twice as fast when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-
cell stack to power the electric motor in the car. Textbook included. A matching solar-array is also available for $86.
Specifications
Electrolyser mode: 2W (maximum 4V and 500mA)
Fuel-cell mode: 1W
Gas storage: 15cm³ H2; 15cm³ O2
H x W x D: 75x90x200mm Weight: 300g
This model fuel-cell vehicle has a two-cell reversible fuel-cell stack, twice the size of the fuel-cell in the HyRunner, so it can produce its own hydrogen twice as fast when an external voltage is applied, such as from solar cells or a power-supply. The hydrogen and oxygen are then fed back through the fuel-
cell stack to power the electric motor in the car. Textbook included. A matching solar-array is also available for $86.
$500
with matching
solar array
solar array
Please allow 28 days for delivery
